First Time Pairing Procedure (Android) - Gator GHDVR85W Manuel

13
First time pairing procedure
For Android phones
1. Restart/ Reboot your phone. (Turn it completely off, then
back on again).
2. Make sure that you have your "LOCATION" turned on,
and your "MOBILE DATA" turned off. The procedure to
access this setting is often, Swipe down from the top of
your screen to the bottom at least 2 times and then swipe
from left to right (or right to left).
3. Make sure your phones MOBILE DATA is turned OFF
during this procedure.
4. Power up your Dash Cam. In most cases this will take
place when you turn your key to accessories and your 12V
socket receives power. If not, start the car or turn on the
Ignition (but do not do this on a public road).
5. Make sure no other Apps are running (including the
Gator Dash Cam App) and close them if needed. Go to
your WIFI settings and search for a WIFI access point
name that will start with the model number of your device.
For example, if you have a GHDVR85W, it will be
something like GHDVR85W-O23Cd.
6. Select the network and enter the password 12345678
then connect. Your WIFI network should now have the
word "Connected" under it in "Current network". Your
phone may advise you that "Internet may not be available"
"Connect to another network or turn on