Champion Power Equipment 100380 Manuel De L'opérateur page 30

100380 - REAR TINE TILLER
FORWARD BELT IDLER
b. Slide the belt free of the engine pulley.
c. Pull the belt down and away from the transmission pulley.
ENGINE
PULLEY
TRANSMISSION
PULLEY
7. To install the reverse drive belt:
a. Insert the belt from underneath the unit and up around
the reverse belt idler.
b. Place the lower loop of the belt around the rear portion of
the transmission pulley.
c. Replace the reverse belt idler into the reverse belt idler
bracket. The belt should not go around the engine pulley.
Be sure the belt is inside of the reverse belt guide studs.
FORWARD STUD
ASSEMBLY
FORWARD
BELT
30
REVERSE BELT
IDLER
ENGINE
PULLEY
TRANSMISSION
PULLEY
REVERSE
BELT
8. To install the forward drive belt:
a. Insert the belt from underneath the unit and up around
the rearward portion on the engine pulley.
b. Place the lower loop of the belt around the rearward
portion of the transmission pulley.
c. Replace the forward belt guide studs and forward belt
idler assembly.
ENGINE
PULLEY
TRANSMISSION
PULLEY
FORWARD BELT IDLER
9. Tighten the forward and reverse lower jam nut.
MAINTENANCE
FORWARD
BELT
FORWARD STUD
ASSEMBLY