Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Quick Start Instructions
1. Plug the AC adapter into the Digital Photo Frame and plug it into a wall outlet.
2. Insert a memory card into the slot.
Memory cards that can be used in this device are: Secure Digital™, MultiMedia Card™,
Memory Stick™, Memory Stick Duo™ and Memory Stick Pro™.
3. Turn on the Power Switch located on the side of the Digital Photo Frame.
4. Once the Digital Photo Frame has been turned on, the demo slide show will run automatically
or if you have a memory card with images on it they will begin to playback. Continuously
press the Up button for one or two seconds to start slide show function in any mode expect
silde show mode.
5. In slide show mode, continuously press the MENU/EXIT button twice to enter the "Select
Card" page.
SD/MMC
6. Press the
Photo mode. Thumbnails of your images will be shown on the screen. In Photo mode,
press the MENU/EXIT button once to enter the "Select Card" page.
7. Using the procedure in Step 6, press the
MENU/EXIT button for few seconds to enter "Copy/Delete" page. You can copy or delete
the current picture under this menu.
8. Using the procedure in Step 6, press the
OK button to view it in full screen. Press the MENU/EXIT button to return to Select Card
Page.
9. When viewing a picture, press the OK button again to enlarge the current picture, and
press the
mode.
10. On the "Select Card" page, press the
the OK button to enter. Press the
or
button to adjust the parameters you prefer. In the SETUP mode, you can setup
"Language" "Slide Show Effect", "Slide Show Speed", "Display Mode", "Auto Slide Set" ,"Color
Enhancement" and "Default".
XSA-00751A NA UM Sep 2.indd 4
Quick Start
MS
Select Card Page
or
button to select a type of memory card and press the OK button to enter
button to rotate the picture. Press the MENU/EXIT button to return to Photo
Internal Memory
or
button to select a picture, and press the
or
button to select a picture and press the
or
button to select the SETUP mode and press
or
button to select a setup item, and press the
SETUP
9/4/08 2:51:21 PM
Publicité
Table des Matières
