oneConcept Kingcool Mode D'emploi page 13

Control Panel and Keys
POWER
Plug the plug into the socket and press the POWER button. The device starts
at low speed. To turn the unit off, press the POWER button again.
TIMER
Press the TIMER button several times to set one of the following switch-off
timers: 0.5 hour > 1 hour> 2 hours> 4 hours.
SWING
Press the button to swing the fan blade back and forth.
COOL
Press the button to activate the cooling by evaporation.
ANION
Press the button to refresh the air.
SPEED
Press the button several times to select one of the following speeds: Slow>
Medium> Fast.
TYPE
Press the button several times to select one of the following modes: Normal>
Natural Wind> Night Mode.
Note: When you select a specific function, the appropriate indicator lights
up. The buttons on the remote control have the same function as the
buttons on the control panel.
EN
13