dji FPV GOGGLES Guide De Démarrage Rapide page 3

Introduction
The DJI FPV Goggles are equipped with a high-performance display and DJI HD Low
TM
Latency (HDL) FPV transmission technology, with a transmission range of up to 4 km and a
minimum end-to-end latency within 28 ms*. When used with a racing drone equipped with
the DJI FPV Air Unit, users can enjoy a first-person view of their aerial experience in real
time. The goggles support 810p 120fps HD display and up to eight selectable transmission
channels**, providing users with a smooth and stable high-definition racing experience.
1. Antennas
2. Front Cover
3. Channel Adjustment Buttons
4. Channel Display
5. USB-C Port
6. microSD Card Slot
7. Air Intake
8. Interpupillary Distance (IPD)
Slider
10
11
* The end-to-end latency is the total time from camera input to screen display. The DJI FPV Goggles can reach their
minimum latency in Low Latency mode (720p 120fps) and achieving maximum transmission distance (FCC) in a
wide open area with no electromagnetic interference.
** There are up to eight channels for the goggles depending on the region (FCC: eight, CE/SRRC: four, MIC: three).
Each channel has a bandwidth of 20 MHz. The public channel is 8, which is the default channel when the equipment
is powered on. The channel can be changed manually to avoid interference from other devices.
2
9
12
13
14
15
16
17
18
1
2
3
4
6
7
8
9. Headband Attachment
10. Foam Padding
11. Lens
12. Air Vent
13. Record Button
14. Back Button
15. 5D Button
16. Audio/AV-IN Port
17. Power Port (DC5.5×2.1)
18. Link Button
5