Eldes EWM1 V2 Mode D'emploi page 12

• NEVER attempt to dismantle the device.
• DO NOT connect the device to the supply voltage if any dam-
age is suspected. Life-threatening danger!
• DO NOT touch the device with damp or wet hands!
• Never use the device with AC power plug adapters!
The EWM1 V2 is designed in accordance with protec-
tion class I. The power source that may be used is the
household electrical outlet (230VAC, 50Hz) with the
protective earth conductor of the public power supply
system.
The device is not meant for outdoor use, i.e. you should
use it inside a building. Protect the device against cold,
heat and keep away from direct sunlight while in stor-
age or operation.
The device must be kept out of the reach of children.
Take particular care when children are around!
Never install or carry out maintenance during stormy
weather. The electric socket that powers the device
must be easily accessible.
To switch the system off, unplug the device from the
household electrical outlet. A blown fuse cannot be re-
placed by the user. The replacement fuse has to be of
the kind indicated by the manufacturer (fuse F1 model
– SIBA 160000.0,25 0.25A 250V).
12 EN