Publicité
Les langues disponibles
Les langues disponibles
Place a cup on the removable grid. As
soon as the lights on the control buttons
stop flashing, press the small cup or
large cup button to start brewing coffee.
To stop the coffee flow, press again the
selected cup button.
To have a hot coffee, it is advised to pour a first cup with adapter without
capsule inside.
We recommend using a preheated cup.
The coffee volume of the large cup is set by default for a flow of approxi-
mately 47 seconds and that of the small cup is approximately 25 seconds. To
set the flow time, refer to the instructions "Setting the coffee volume" on
page 37.
Make sure to close the lever before pressing the buttons.
Always make sure to put a cup on the drip grid.
If you are no longer using the appliance after preparation, be sure to wash
the adapter with hot soapy water for future use.
Lift the lever and remove the adapter.
Lower the lever to close it.
Wait until the adapter has cooled down
before opening its cover to discard the
used capsule. If you are no longer using
the device, ensure to wash the adapter
with hot soapy water for future use.
16
Publicité
