ELVA Rapid 55 C Mode D'emploi page 10

3 Assembly
The machine has to be assembled according to the following illustration
before using the first time :
ELVAmac SA
tél. +41 21 801 21 77
Route de Préverenges 10
fax +41 21 803 00 96
1. Fix the handle with two screws to the
top of the machine
2. Attach the two side frames to the main
column
3. Connect the two leg bars to the side
frame
4. After the floor corker is assembled, the
wire capper can be attached at the
main column from the right side.
1026 Denges ; Switzerland
e-mail info@elvamac.ch www.elvamac.ch
page 10