Figure 5-7: Wpa-Personal Needed For Connection; Figure 5-8: Wpa2-Personal Needed For Connection - Cisco Systems Linksys WPC54GX4 Mode D'emploi

Wireless-G Notebook Adapter with SRX400
If the network has WPA Personal security enabled, then you will see the WPA-Personal Needed for Connection
screen. Select the appropriate encryption type, TKIP or AES. Enter the network's Passphrase or pre-shared key in
the Passphrase field. To connect to the network, click Connect. To cancel the connection, click Cancel.

Figure 5-7: WPA-Personal Needed for Connection

If the network has WPA2 Personal security enabled, then you will see the WPA2-Personal Needed for Connection
screen. Enter the network's Passphrase or pre-shared key in the Passphrase field. To connect to the network,
click Connect. To cancel the connection, click Cancel.

Figure 5-8: WPA2-Personal Needed for Connection

Chapter 5: Using the Wireless Network Monitor 22
Site Survey