Philips RQ1145 Mode D'emploi page 21

Extra-thorough cleaning method
Make sure the appliance is switched off.
1 Pull the shaving head holder off the bottom part of the shaving unit.
2 Slide the green retaining frame in the direction of the arrows
indicated on the retaining frame.
3 Lift the retaining frame out of the shaving head holder.
4 Remove the cutter from the shaving guard.
Note: Do not clean more than one cutter and shaving guard at a time, since
they are all matching sets. If you accidentally put a cutter in the wrong shaving
guard, it may take several weeks before optimal shaving performance is
restored.
5 Clean the cutter with the cleaning brush supplied.
English
21