Motomaster 009-5031-8 Guide D'utilisation page 5

4
Model no. 009-5031-8 / Contact us 1-888-942-6686
pressure. Once the desired pressure is reached, stop pressing the pre-set buttons. The
display will show the pressure of tires automatically. Do not adjust the pre-set pressure
below the pressure of tire or air compressor will stop working.
Inflating tires
Roll out the 12 V cord and connect the 12 V adaptor to the vehicle's 12V outlet.
1
Adjust to your desired pressure (refer to Pressure Pre-set).
2
Connect quick connect valve adaptor onto tire's valve stem and push down the valve lock
3
lever to secure the connection.
Move the inflator switch to '
4
Press working light button for visibility in the dark. The working light can be rotatable.
5
Press again to turn it off.
Press flashing warning light button for emergency use. Press again to turn it off .
6
When car or bicycle tire's pressure reaches pre-set pressure, the air compressor will stop
7
automatically.
Remove the quick connect valve adaptor from the tire and disconnect the 12 V car
8
adaptor.
Inflating sports equipment and/or small inflatables
Roll out the 12 V cord and connect the 12 V adaptor to the vehicle's 12V outlet.
1
Adjust to your desired pressure (refer to Pressure Pre-set).
2
Insert ball/balloon/bicycle adaptor into the quick connect valve adaptor and push down
3
the valve lock lever to secure the connection.
Insert the ball/balloon/bicycle adaptor into valve of objects to be inflated.
4
Move the inflator switch to '
5
Press working light button for visibility in the dark. The working light can be rotatable.
6
Press again to turn it off.
Press flashing warning light button for emergency use. Press again to turn it off .
7
When the pre-set pressure reached, the air compressor will stop automatically.
8
Remove the ball/balloon/bicycle adaptor from the inflated object's valve and disconnect
9
ball/balloon/bicycle adaptor from the quick connect valve adaptor. Put the
ball/balloon/bicycle adaptor back to the storage compartment.
CAUTION
Allow compressor to cool for 10 minutes after 10 minutes of continuous operation.
' and the compressor will begin to operate.
' and the compressor will begin to operate.