Installation And Ambient Conditions; Important - Costan NC5xSyD Mode D'emploi

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
USES OTHER THAN EXPLICITLY INDICATED IN THIS BOOKLET MUST BE CONSIDERED AS HAZAR-
DOUS. THE MANUFACTURER DISCLAIMS ALL LIABILITY FOR DAMAGE RESULTING FROM IMPRO-
PER, INCORRECT OR UNREASONABLE USE.
1. DESCRIPTION
The display cabinet, is available in two depth, four different lenghts and in one height. The low-
temperature version of this showcase is meant for the preservation of ice-creams and frozen food
(class L). Its main features and dimensions are clearly illustrated in drawings 1, 2, on page 4 and 5.
As for its weights, crating included and excluded, see table I on page 6. A wide variety of optional
accessories enabling enhanced functions is also available. To this respect, contact the authorised
after-sales service only.
2. TRANSPORTATION
The cabinet is contained in a specially crated package that enables transportation by the use of
fork-lift trucks. Handle the machine on its own pallet or on a similar platform; use a fork lift truck,
either manual or electric, provided that it is adequate for handling such appliances and it has the
requisite lifting capacity (see page 6 - fig. 3 and table I). Handling is reserved for the authorised
after-sales service.
3. DELIVERY AND STORAGE
Prior to accepting the case from the carrier, check the conditions of the package. If it is showing
visible damage, the machine too may have been impaired. In this case, unpack the machine in the
presence of the carrier and sign, though with reservation, the delivery bill. The manufacturer assu-
mes no liability for damage caused by transportation or wrong handling during storage. Unpacking
is reserved for the authorised after-sales service. Storing temperature must be between -25°C and
+55°C, air humidity between 30% and 95%. Keep the cabinet safe from direct sunlight and from
the elements.

4. INSTALLATION AND AMBIENT CONDITIONS

The display case must not be installed in premises containing explosive gas substances.
It can neither beused in the open nor exposed to the rain.
Before connecting the case make sure that its rating plate data correspond to the features of the
existing electrical installation (see page 8 - fig 7 and tab. III). For correct operation, the machine
must be placed on a level floor (see page 7 - fig 4), far from sources of heat and/or direct sunlight,
doors, windows, fans or ventilation outlets (see page 7 - fig.5). It must also be granted a reasona-
ble free front area for customer service.
The display case must be housed in a room conforming to the ambient requirements
mentioned in page 7 - fig. 6 and tab. II.
IMPORTANT: placing fixed panels on the top of the cabinet is advised against, as this part
must be accessible for servicing purposes.
The cabinet needs a minimum front clearance of 1,5 mt, which is required to allow use by custo-
mers, enable servicing by the personnel and also ensure the air flow required for condenser coo-
ling. The minimum distance between the back of the cabinet and the wall is 60 mm.
5. ELECTRICAL CONNECTION
IMPORTANT: ahead of the case there must be an MULTIPOLAR CUT-OFF SWITCH WITH CONTACTS
GRANBERING INTEGRAL
NC5xSyD
Epta Spa - Unità locale: Via degli Alpini 14 - 32020 Limana (BL)
ITALIA Tel. 0437/9681 Telefax 0437/967434
23/45
PAGE:
UM000329
N° DOC.