Inserting Zippers And Piping; Hand-Look Quilt Stitch - Blaupunkt COMFORT 930 Manuel

INSERTING ZIPPERS AND PIPING

Use the zipper foot to sew to the right or left of the
zipper or close to the cord.
INSERTING ZIPPERS
To sew down the right side, attach the left side of the
zipper foot to the presser foot holder so that the
needle passes through the opening on the left
side of the foot.
To sew down the left side, attach the right side of the foot
to the footholder.
PIPING
To pipe soft furnishings, cover the cord with a bias
strip of fabric and pin or tack it to the main piece
of fabric.
Attach the right side of the zipper foot to the foot holder so
that the needle passes through the opening on the right
side of the foot.
Helpful Hint: Slight adjusting of the needle position to sew
closer to the piping may be accomplished with the Stitch
Width Control.

HAND-LOOK QUILT STITCH

This stitch is designed to look like hand sewing for
topstitching and quilting.
1. Thread the bobbin with desired top stitching color.
When
sewing, the machine will pull this thread to the top.
2. Thread the machine with an invisible or lightweight
thread, using
the color that matches your fabric. This thread
should not show.
3. Increase thread tension a little bit at a time until you
achieve
the desired appearance.
4. Start to sew
NOTE: For a dramatic appearance, experiment with
different tension and stitch length combinations.
16
Needle to left of foot Needle to right of foot