Yamaha YST-RSW300 Mode D'emploi page 7

7
STANDBY/ON switch
Press this switch to turn on the power when the
POWER switch is set in the ON position (the status
indicator lights up in green). Press again to set the
subwoofer in the standby mode (the status indicator
goes off).
Note
Even while the subwoofer is in the standby mode, it is
still using a small amount of power.
8
Status indicator
Lights up in green while the subwoofer is on.
Lights up in red while the subwoofer is set in the
standby mode by the operation of the automatic power-
switching function.
Goes off when the subwoofer is set in the standby
mode.
9
HIGH CUT control
Adjusts the high frequency cut off point. Frequencies
higher than the frequency selected by this control are
all cut off (and no output). One graduation of this
control represents 10 Hz.
0
VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to decrease
the volume.
CONTROLS AND THEIR FUNCTIONS
5
En