NETGEAR Aircard 797 Démarrage Rapide page 5

Set up your hotspot
To connect to the mobile broadband
network, your SIM account must be
active. If you use a prepaid or pay-as-
you-go micro SIM, the account must
show a positive balance.
1. Press and hold the Power button
until the LCD screen lights.
2. Press the Power button to select a
language. Hold the Power button
to confirm the language to be
used.
The status LED indicates data
connection status:
• Blue, slow blink. The hotspot is
ready.
• Blue, double blink. The hotspot is
transferring data.
• Amber, slow blink. The hotspot is
not connected to the network.
Note: To turn off the hotspot, press
and hold the Power button for five
seconds.
5