General Information; Dimensions - Joannes LADY 30 S Manuel D'installation Et D'entretien

GENERAL INFORMATION

The LADY boiler is a highly efficient unit that meets all domestic heating and hot water requirements. It is
suitable for operation with liquid fuel.
The boiler body is made of cast iron elements and is assembled with steel bicones and studs. The fins are
distributed in such a way as to assure high heating performance with consequent fuel conservation.
The final aesthetic image is guaranteed by a control panel of modern design and by the pressure assembled
enamelled chassis.
LADY 30 R
This boiler is suitable for heating. It can be equipped with burner and heater, which ensure a good starting
during cold weather and after prolonged shut off, improving oil atomization, and, consequently, the combustion
itself.
LADY 30 S
This boiler, in addition to heating, provides hot water by means of an instantaneous water heater. Like version
R, it can be equipped with burner and heater.
DIMENSIONS mm
500
a1 Heating system delivery Ø 3/4"
a2 Heating system return Ø 3/4"
a3 Cold water inlet Ø 1/2"
a4 Hot water outlet Ø 1/2" (only S models)
730
fig. 1
a3
a1
a2
a4
185
14