Cleaning And Storage; Troubleshooting - gourmetmaxx XJ 12403 Mode D'emploi

Cleaning and storage

ATTENTION!
❐ Prior to each cleaning, pull the plug out of the socket.
❐ Never submerge the motor unit in water or other liquids.
❐ Be careful when handling the juicer sieve, the blades are sharp!
❐ When cleaning, do not use any scouring or abrasive cleaners. They could damage
the surface.
1. Ensure that the device is switched off and not connected to a socket!
2. Open the locking clips.
3. Remove the lid and the plunger.
4. Remove the juicer sieve from drive disc of the motor unit.
5. Remove the cover with the juice discharge.
6. Remove the pomace container.
7. Empty the pomace container and clean all removable parts (except for the motor
base!) with warm water and a mild detergent or in the dishwasher. Then dry all parts
thoroughly. Please note: All removable parts may be cleaned in the dish washer.
However, frequent cleaning in the dishwasher may dull the blades of the juicer sieve.
For this reason we recommend cleaning by hand.
8. If necessary, clean the motor unit with a damp cloth.
9. Reassemble all parts when all parts are completely dry.
10. Store the device in a dry area that is not accessible to children and animals.

Troubleshooting

If the device is not working properly, please check whether you are able to rectify the
problem yourself fi rst. Otherwise contact customer service. Do not attempt to repair a
defective device yourself!
Problem
The device is not
working.
Potential cause/solution
• Is the mains plug properly connected with the socket?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the device correctly assembled? Check if the juicer sieve
is correctly seated and if the locking clips have been closed.
• Is the device activated? Press the On/Off switch.
18