Getting To Know Your Phone - AEG SOLO 10 Guide De Démarrage Rapide

3
3.3 Handset & Base Connection
When purchased, all handsets are already registered to the base unit and should link to it when they are
all powered up.
To use your cordless handset and base unit together, you must be able to establish a radio link between
them. The signal between the handset and the base unit is in accordance with the normal standards for
a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors. Be aware that:
>Large metal objects, such as refrigerators, mirrors or filing cabinets, between the handset and the base
unit may block the radio signal.
>Solid structures, such as walls, may reduce the signal strength.
>Electrical equipment may cause interference and/or affect the range.
Do not place the base unit close to another telephone, TV or audio equipment - it may cause interference.
Putting the base unit as high as possible ensures the best signal.
Out of Range warning. If you hear a warning tone during a call, and/or the sound in the earpiece
becomes faint or distorted, you may be going out of range of the base unit. Move nearer to the base
unit within 20 seconds; otherwise the line may be cut off.
4

GETTING TO KNOW YOUR PHONE

4.1 Handset Overview (See P1)
# Icon
In standby mode, press to enter the Main Menu list.
1
Press to select an item, or to save an entry or setting.
In menu mode, press to scroll up.
2 During a call or message playback, press to increase the volume.
In standby mode, press to access the call log.
Press to make or answer a call.
3 During a call or message playback, press to switch between speakerphone and
earpiece.
Press and hold to switch the key lock on or off
4
5 During a call, press to send a Flash signal for network services.
6 In standby mode, press to access the redial list.
7 In standby mode or during a call, press to initiate an intercom call or transfer a call.
Press to cancel an action.
During pre-dialling, press to delete the last digit entered.
8
During a call, press to mute the microphone, and press again to resume
conversation.
In menu mode, press to scroll down.
9 During a call, or message playback, press to decrease the volume.
In standby mode, press to access the phonebook list.
During a call, press to hang up.
10 During programming, press to cancel and exit without making changes.
In standby mode, press and hold to power the handset on/off.
Press and hold to turn the handset ringer off.
11 Press and hold to add a dialling pause when dialling or entering numbers into the
phonebook.
Meaning