EDIFIER Sound To Go Plus Manuel D'utilisateur page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Specifications
Power output:
RMS 1.5W X 2 (THD + N = 10%, f0=1KHz)
Signal to noise ratio:
≥80dBA
Input sensitivity:
AUX: 900mV ± 50mV(THD + N = 10%, f0=1KHz)
Input type:
AUX / USB
Frequency response:
270Hz~17KHz (±5db)
Adjustment:
Volume button
Speaker unit:
4 x 1¼inch (32mm), magnetically shielded, 4Ω
Power supply:
USB power supply, Li-ion battery
Dimension:
261mm x 36mm x 44mm (W x H x D)
Net/Gross weight:
Approx. 0.37kg / 0.45kg
5
English
Not all speakers function:
Please first check if the speaker wires are connected securely; then check if the Line-in connectors are reversed;
check also if the audio source is at fault.
One satellite speaker does not function when playing CD from computer:
This kind of phenomena is prone to happen on new computer systems that one satellite does not function when playing
CD, but system works fine when playing WAV formatted files.
This is mainly due to the fault connection of CD-ROM and sound card, that one channel of signal is shorted to the ground.
Please refer to the manual of CD-ROM and sound card to adjust the wire connection.
System does not work at all:
1. Please check if power is connected, and if the wall outlet is switched on.
2. Please check if the master volume is turned to minimum.
3. Please check if the audio input cable is connected correctly.
4. Please check if there is signal from audio source.
Noise coming from speakers:
Amplifier circuitry of this product generates little noise, while the background noise of some VCD/DVD player or computer
sound card are too high.
Please keep the system in active mode and remove the audio source, if no sound can be heard at 1 meter away from
the system, then there is no problem with this product.
Magnetic interference:
This system is complete magnetically shielded, and can be placed near TV or monitor.
But since magnet of the subwoofer driver is large, some magnetism leakage is inevitable when the system is too
close to the monitor, and it is recommended to keep a 1 meter distance between the speaker system and monitor
or TV set.
If you have any further questions or concerns regarding Edifier Products
Please visit our website at: www.edifier.com, or email Edifier Support for further assistance
at: main@edifier.com, If you prefer, you may contact us by phone, Toll Free: 1-877-EDIFIER (334-3437).
Troubleshooting
6
English

Publicité

Table des Matières
loading

Produits Connexes pour EDIFIER Sound To Go Plus

Ce manuel est également adapté pour:

Mp250 plus

Table des Matières