Fujitsu ScanSnap Carrier Sheet Option Guide D'installation page 4

● Scanning Photographs and Clippings
1. Open the Carrier Sheet and place the document inside.
(Align the top of the document so that it touches the top center of the Carrier Sheet.)
2. Load the Carrier Sheet onto the
Scanning starts and the image data is generated in the specified size.
The output image is generated with the scanned document image
placed in the center of the specified size of the output image.
In the "Carrier Sheet Settings" window, when you select "Automatic
Detection" in "Output image size", an ideal size among the standard
sizes is selected automatically.
If the following symptoms are observed, place a piece of
HINT
white paper behind the document
The scanned document cannot be generated in a
●
suitable size (when [Automatic Detection] is selected)
A shadow appears on the edges of the document.
●
Black lines appear around the document that is clipped
●
into a special shape.
For the detailed usage, refer to "ScanSnap Carrier Sheet Option User's Guide"
"ScanSnap fi-5110EOX" and press [SCAN].
EN-4
White paper