Delta Classic Série Mode D'emploi
Llaves de dos manijas de montura de centro para lavamanos
Masquer les pouces
Voir aussi pour Classic Série:
- Instructions de montage (29 pages) ,
- Instructions d'installation (8 pages)
Publicité
Liens rapides
Models/Modelos/Modèles
2500LF, 2502LF, 2503LF,
2510LF, 2512LF, 2520LF,
2522LF & 2523LF
Classic Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and
maintenance information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Delta usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
www.deltafaucet.com
TWO HANDLE LAVATORY
70743
CENTERSET FAUCETS
LLAVES DE DOS MANIJAS DE
MONTURA DE CENTRO PARA
LAVAMANOS
ROBINETS À ENTRAXE COURT
À DEUX POIGNÉES
1
?
6/08/17
Rev. E
Publicité
Manuels Connexes pour Delta Classic Série
Sommaire des Matières pour Delta Classic Série
- Page 1 Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin: For easy installation of your Delta faucet you will need: • To READ ALL the instructions completely before beginning.
- Page 2 1/2" (13 mm) IPS Make connections to water lines. Use 1/2" IPS faucet connections (A), Position faucet (1) and gasket (2) on sink. Hand tighten nuts (3). or use the supplied coupling nuts (1) with 3/8" O.D. ball-nose risers (B). Option: If sink is uneven, use silicone under the gasket.
- Page 3 Step 3b Step 3e Metal Pop-up Remove pivot nut (1). Install horizontal rod Apply silicone to underside of flange (1). Step 3c Insert body (2) into sink. Screw flange (1) (2) and stopper (3) as removable (4) or non- Remove stopper (1) and flange (2). into body (2).
- Page 4 Pop-Ups with Metal Flange and Plastic Tail Piece Remove stopper (1), brass nut & washer (2), With pivot (1) facing toward faucet, pull Remove pivot nut (1). Install horizontal black gasket (3) and tail piece (4). pop-up straight down into drain hole and rod (2) and stopper (3) as removable (4) secure gasket (2), brass nut and washer (3).
-
Page 5: Entretien
Maintenance Remove aerator (1) using supplied wrench (2), and turn faucet handles (3) to the full on mixed position. Turn on hot and cold water If faucet leaks from spout outlet–Shut off water supplies–Replace supplies (4) and flush water lines for one minute. Important: This Seats and Springs (1).* flushes away any debris that could cause damage to internal parts. - Page 6 RP70541 RP70543 RP64364 Blade Handle Kit Knob Handle Kit Lever Handle Kit Manija Manija Redonda Manija Palanca RP18373 Poignée RP2412 Poignée Ronde Poignée de Levier Buttons Buttons Botones Botones Boutons Boutons RP5885 RP5885 Screws Screws Tornillos Tornillos Specify Finish Especifíque el Acabado RP6146p Précisez le Fini Lift Rod...
- Page 7 Notes / Notas / Notes 70743 Rev. E...
-
Page 8: Cleaning And Care
January 1, 1995 and installed in the United States of America, Canada and Mexico. use and service. If repair or replacement is not practical, Delta Faucet Company may elect to DELTA FAUCET COMPANY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR refund the purchase price in exchange for the return of the product.