Setting Alarm Time; Backlight - National Geographic 278NE Mode D'emploi

4 Operation
4.1 Setting language and time zone
1. Press and hold the WAVE/SET button (4) to enter set mode.
2. Press the + button (3) for your desired time zone, 0 for GMT+1 time zone, 1 for GMT+2 time
zone or -1 for GMT time zone.
3. Press the - button (5) to change the day of the week language display.
4. Press the WAVE/SET button (4) to confirm and enter calendar setup mode. (English/
German/French or Italian).
4.2 Manual calendar and clock setup
5. After setting the language and time zone, the year will blink on the display.
6. Press the + (3) or - (5) button to toggle to the correct year.
7. Press the WAVE/SET button (4) to confirm.
8. Follow steps 5-6 to set the date, time and 12hr/24hr mode.
9. When in 12/24hr setup mode, press the + (3) button to toggle between 12hr and 24hr mode
and press the - (5) button to toggle between Celsius and Fahrenheit.
10. Press the WAVE/SET button (4) to confirm and return to stand-by.
4.3

Setting alarm time

1. Press the + (3) or - (5) button to set the alarm time. The alarm time and AL icon will be
displayed.
2. Slide the alarm switch (7) to ALM ON to activate the alarm,
3. When the alarm sounds press the SNOOZE/LIGHT button (1), the alarm will turn off and will
sound again the next day at the same time.
4. To activate the snooze alarm, slide the alarm switch (7) to SNOOZE,
appear.
5. When the snooze alarm sounds press the SNOOZE/LIGHT button (1), the alarm will sound
again in approximately 5 minutes.
6. To deactivate the alarm, slide the alarm switch (7) to ALM OFF,
4.4

Backlight

1. Press the COLOR SELECT button (6) to toggle between the 7 colour backlight options.
2. When the SNOOZE/LIGHT button (1) is pressed the chosen colour will be displayed as the
backlight
278 NE
will appear on the screen.
Z z
and will
Z z
and disappear.