Using The Mixer; Turbo Mode; Hints And Tips - Russell Hobbs MX3100RDR Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE MIXER

1.
Once attachment(s) are firmly inserted, plug the mixer into outlet.
2.
Press and release the
Press the + button to start your mixer and increase the speed, press the
3.
– button to decrease the speed. When running the
stay on. Repeatedly pressing the – button will reduce the speed to zero
and stop your mixer. The
4.
To stop your mixer quickly, press the

TURBO MODE

If you press and hold the + button while your mixer is running, after two
seconds, it will run at its highest speed and continue to do so as long as you
hold the button. Release the button and your mixer will revert to the previously
set speed.

HINTS AND TIPS

Generally, large quantities, thick mixes, and a high ratio of solids to liquids
need longer mixing times at slower speeds.
Smaller quantities, thinner mixes, and more liquids than solids need
shorter mixing times at higher speeds.
Use the beaters for beating/aerating light dough, batter, egg whites and
cream.
Use the hooks for mixing heavier dough (e.g. bread, fruit-cake).
When making dough, use your mixer only for mixing the ingredients. Don't
use it for kneading. You'll overload it and damage the motor.
If the motor starts to labour, add more liquid to the mix, if possible, or
switch off and carry on by hand.
CLEANING
1.
Unplug the appliance.
2.
Disassemble the appliance.
3.
Wipe the outside of the motor unit with a clean damp cloth.
4.
Wash the attachments in hot water with dish detergent, or in the cutlery
basket of your dishwasher
button. The
button light will flash.
button light will flash.
button.
7
button light will

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mx3100bkrMx3100crrMx3100wtrMx3100blr

Table des Matières