Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cell.Man.UK/Fr.10.06
11/6/03
Before Starting
The CellRoute-GSM must be connected to the mains and
allowed to charge for a minimum of 30 minutes before
use.
For maximum battery stand-by performance, the unit must
be connected to the mains for a minimum of 4 hours.
Setting up the Terminal
Remove the CellRoute-GSM from the packaging and
proceed as follows:
Warning! To avoid damage, do not connect the power
unit until you have inserted the SIM card.
• Install the SIM card, - ensuring that any active PIN
lock feature is deactivated. (Check with your SIM card
provider for more details on PIN lock/unlocking).
• Install the CellRoute-GSM in preferred location,
following guidelines (page 6).
• Connect power to the CellRoute-GSM using the Power
Supply provided.
• Connect a telephone to the CellRoute-GSM.
• Check Signal Strength (page 7).
• Make a test call.
16:47
Page 5
Getting Started
Installing the SIM card
Slide open the SIM cover.
Slide back the SIM door and lift it up.
Slide the SIM card into the SIM door making sure
that the clipped corner of the SIM card lines up
with the clipped corner of the SIM holder.
Close the SIM door.
Slide the SIM door to lock the SIM card in place.
Then replace the SIM cover.
5
CellRoute-GSM
Publicité
Chapitres
Table des Matières
