Technical Data - Weelko ABSOR Mode D'emploi

CONTENT
On arrival of the package, check the pre-
sence of the following items:
-Table-top dust collector
INSTALLATION AND
OPERATION
1. Plug the device into a wall socket.
2. Place it on a flat, ventilated and
safe surface to avoid knocks and falls.
3. Place the dust collection bag co-
rrectly.
4. Turn the rear switch on.
5. Place the patient's hand on the
surface of the fan to start the manicure
treatment.
6. Only dust extraction must be ab-
sorbed by the collector.
7. Empty or replace the dust collec-
tion bag after each use.
EN
CAUTIONS
• Turn the device off after each use
and unplug it from the wall socket.
• Keep the power cord away from
fire or potential danger zones.
• Keep the device out of reach of
children to avoid accidents or injuries.
Store the device correctly after each use.
• If the device is not working proper-
ly, do not use it and contact your distri-
butor.
MAINTENANCE
• Clean the device with a soft dry
cloth. Do not use damp cloths to avoid
damaging the surface of the device.
• Clean the device regularly to pre-
vent cotton particles or hairs from bloc-
king the air outlet.
• To ensure the optimum use of the
device, use the dust collection bag and
change it regularly.

TECHNICAL DATA

VOLTAGE
FREQUENCY
RATED POWER
DIMENSIONS
WEIGHT
220VAC-240VAC
50HZ/60HZ
23 W
30x30x13 CM
1 KG
© 2020 Weelko
www.weelko.com
Importer: Weelko Barcelona, S.L.
ESB65397556