Flexitron WebdynSun Manuel D'utilisation page 9

Cette alimentation se monte à côté de la passerelle sur le rail métallique standardisé (RAIL DIN) de
35mm. Ce montage sur rail ne nécessite aucun accessoire de montage supplémentaire.

En cas de télé-alimentation de modules analogiques veuillez vérifier la tension
réglée sur l'alimentation RAIL DIN

Vérifier également la consommation des modules analogiques télé-alimentés.
Caractéristiques :
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
RIPPLE & NOISE (max.) Note.2
VOLTAGE ADJ. RANGE
OUTPUT
VOLTAGE TOLERANCE Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
INPUT
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
OVERLOAD Note.5
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
ENVIRONMENT
TEMP. COEFFICIENT
VIBRATION
WebdynSun – Manuel d'utilisation - Version 2.1
MANUEL D'UTILISATION - WebdynSun
24V
0.63A
0 ~ 0.63A
15.2W
150mVp-p
21.6 ~ 26.4V
±1.0%
±1.0%
±1.0%
1000ms, 50ms/230VAC
1000ms, 50ms/115VAC at full load
70ms/230VAC
16ms/115VAC at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 63Hz
85%
0.88A/115VAC
0.48A/230VAC
COLD START 35A/115VAC
65A/230VAC
105 ~ 160% rated output power
Protection type : Constant current limiting,
recovers automatically after fault condition is
removed
27.6 ~ 32.4V
-20°C ~ +60°C (Refer to output load derating
curve)
20 ~ 90% RH non-condensing
-40°C ~ +85°C , 10 ~ 95% RH
±0.03%/ (0 ~ 50)c°)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min.
each along X, Y, Z axes; Mounting: Compliance
to IEC60068-2-6
9