HoMedics FB-655HJ Mode D'emploi page 5

SHIATSU BLISS WITH HEAT BOOST POWER
• Heat Boost Power heats water to a warm spa temperature in minutes and maintains
temperature throughout use.
• Easy controls to select Bubble Massage, Shiatsu Massage, and Heat Boost Power.
INSTRUCTIONS FOR USE
1. Ensure that the unit is unplugged before filling with water. Fill with water to the max fill
line located on the inside of the tub. For a quicker heat boost, fill with warm water. Once
water reaches selected temperature, it will stay at this temperature for as long as the heat
function is selected.
CAUTION: Do not fill water over the max fill line.
2. Place the unit on a waterproof surface, or any surface that cannot be damaged by
splashing water.
3. Plug the unit into a 120-volt household outlet.
4. Sit down in a comfortable position.
5. With the touch of your toe, turn the unit on by selecting the power
6. Customize your massage by selecting shiatsu, bubbles, and/or heat.
• Bubble Massage - relieves aching feet
• Shiatsu massage - kneading massage simulates 2 hands pressing firmly and slowly
on the soles of your feet
• Heat boost- Soothing heat comforts tired feet
NOTE: The heat function will only work when Shiatsu
can use heat with shiatsu or bubbles, or shiatsu and bubbles combined.
NOTE: Shiatsu massage can be used dry or wet, just add water.
7. To empty: Unplug the unit. Take the footbath to the closest drain and tip the unit allowing
water to pour out along the drain spout. DO NOT pour water over the control panel.
NOTE: To reduce splashing due to different water displacements of feet, raise or lower the
water level of the footbath.
CAUTION: To avoid injury and irreparable damage, always remain seated when using
this footbath. Never stand on or in the unit.
and/or Bubbles
5
.
is turned on. You