Sonnenkonig PURO 4 Mode D'emploi page 26

3 Use
• Insert the power cord into the specific socket at the back of the product.
GB
• Insert the plug into the electrical socket, ensuring the voltage is equal to that specified
on the product plate.
• Press the ON/OFF button; the red LED turns on and the purifier begins purifying the air.
• Press the FAN button; the green LED turns on to show that the fan function is enabled.
The fan increases the air flow circulating within the appliance and therefore makes
filtering even more efficient.
4 Cleaning
Cleaning-collector
Unplug before removing the collector. Then remove the collector from the lower end of
the product, pulling downwards. Use a soft, clean, damp cloth to clean the collector.
Ensure that the collector is completely dry before replacing; follow the direction shown
by the arrow.
Do not operate the purifier before having correctly replaced the collector in its compartment.
Cleaining-purifier
Clean the purifier casing with a soft, damp cloth.
Do not use oils, chemical substances or other items to clean that may damage the surface.
Always unplug before cleaning to avoid any risk of electric shock.
The electrostatic filter inside the product does not require any maintenance.
26