Philips HQ4441 Mode D'emploi page 5

performance. If you accidentally mix the sets up, it
could take several weeks before optimal shaving
performance is restored.
C
Brush carefully in the direction of the arrow.
C
If necessary, you can clean the shaving unit with a
degreasing liquid (e.g. alcohol). Remember to
lubricate the central point of the guards with a
drop of sewing machine oil after cleaning.
C
1
2
Trimmer
Clean the trimmer every time you have used it.
5 Clean the cutter with the short-bristled
side of the brush.
6 Brush the guard.
7 Reassemble the shaving unit by replacing
the retaining frame. Press the wheel and
turn it clockwise.
8 Put the shaving unit back onto the shaver.
1 Switch the shaver off, remove the
powerplug from the wall socket and pull
the appliance plug out of the shaver.
2 Brush the trimmer.
3 Lubricate the trimmer teeth with a drop
of sewing machine oil every six months.
ENGLISH
7