Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
9. Attach side back panel (M) to shelving areas
using back panel screws (DD).
Repeat for remaining back panel (M).
Hardware Used
DD
Back Panel Screw
1 . From Front the assembly, insert shelf pins (EE) at
0
desired height, ensuring they are level. Place
shelf (N) on top of shelf pins (EE).
Repeat for remaining the shelf (N).
Hardware Used
EE
Shelf Pin
1 .
1
Hold the door and align the hinge body with the
hinge plate mounted to the fireplace wall. Align
and slide the hooks/catches on the hinge body
into the recesses on the mounting plate while
lightly pushing the door towards back of
fireplace mantel. Then press on the back part
of the hinge body until you hear it click into
place. Repeat for other hinges.
To remove press the square button at the back
of the hinge body to release the hinge from the
mounting bracket. Unlock both hinges and pull
the door away from the fireplace body
NOTE: Use the pre-assembled levelers on the
base of the fireplace to level the unit. Twist the
levelers counter clockwise to increase the
height, twist the clockwise to decrease the
height.
(CONT'D)
x 20
x 8
9
9
1
M
10
N
11
1
O
DD
1
M
N
EE
1
P
Publicité
Table des Matières
