GOLDSCHMIDT SMARTWELD SPARK Thermit Mode D'emploi page 44

SMARTWELDSPARK
Electrode guide
and LED lighting
Display on the back of the device:
Pilot lamp
IGN-LED
BAT-LED
ERR-LED
44 44
INSTRUCTION MANUAL
Fig. 5: Electrode guide
and LED lighting
Figure
Abb. 6: Display
Connects the
electrode guide
to the device;
Lighting
Meaning
Flashes when the ignition voltage is
available.
Glows constantly when the Thermit
portion is ignited.
Indicates the battery charge
condition. Comes on green, yellow,
violet or red according to the charge
condition of the battery currently in
the device.
Green: ready for another ignition
Yellow: ready for another ignition,
charge batteries
Violet: ready for ignition, backfi re
possible, charge batteries
Red: ignition not possible, charge
batteries
Comes on red if an error occurred in
the device or if the overheat control
was activated. (see chapter 10).
Electrode guide
changeable
®