General Maintenance - vaporetto SV420_FRESCOVAPOR Manuel D'instructions

WARNING: Before using FrescoVapor on
upholstery, leather, special fabrics and wood
surfaces, consult the manufacturer's instruc-
tions and always carry out a test on a hidden
part or sample of the material. Allow the stea-
med part to dry to make sure that no chan-
ges in colour or deformations have occurred.
6. OUT OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank has been used
up, steam will stop being released.
To restart operations just fill the water tank
again as described in the chapter 1.
WARNING: This operation must always be
done after having disconnected the applian-
ce from the mains.
7. REPLACEMENT OF THE LIME-
SCALE FILTER
Vaporetto SV420_Frescovapor
SV400_Hygiene have a filter containing spe-
cial resins capable of stopping the limescale
and extending the life of your product.
We recommend that the filter be changed 3
times per year.
7.1 Unplug from the mains electricity.
7.2 Remove the water tank from the applian-
ce, pressing the upper button and pulling it
outward (3).
7.3 Gently lift the hook tab and remove the
old filter (14).
7.4 Position the new filter, push gently and
make sure that it is perfectly inserted (15),
then reposition the water tank.
The limescale filters are on sale at all leading
domestic-appliance retailers, at Authorised
Service Centres and online at www.polti.com.

8. GENERAL MAINTENANCE

Ensure that the appliance is switched off and
disconnected from the mains.
To clean the outside of the appliance, only use
a damp cloth and tap water.
All accessories can be cleaned using running
water, ensuring they are completely dry befo-
re the next use. After using the brushes, we
recommend letting the bristles cool down in
their natural position, in order to avoid any
deformation.
Do not use detergents of any type.
The cloths provided can be washed by fol-
lowing the instructions included on the label.
9. STORAGE
9.1 Turn off the appliance and disconnect from
the mains electricity.
9.2 Completely empty the water tank to avoid
water leaks.
9.3 Before detaching the cloth from the bru-
sh, wait a few minutes to allow it to cool.
9.4 Wind the power cable around the special
cable-winder hooks (16).
Before using the appliance again, remember
to unwind the power cable completely. The
upper hook rotates 180° in order to wind up
the power cable quickly.
WARNING: Do not keep the appliance con-
nected to the power supply with the cable
wound up.
and
| 24 |