Philips AX7200 Mode D'emploi page 5

English
1
CONTROLS ( see figure )
1 4.5V DC ................ jack for AC/DC adapter power supply
2 EXT BATT ............ jack for external battery supply
3 p /LINE OUT ........ connect the remote control here and your headphones to
the remote control. Insert the supplied headphone jack
adapter (for some versions only) first, if you want to
connect the headphones direct, or want to connect the
player to another audio input of an additional appliance.
4 OFF ....................... switches RESUME and HOLD off
RESUME............... stores the last position of a CD track played
HOLD .................... locks all buttons
5 2;........................ switches the player on, starts or pauses CD play
6 9 .......................... stops CD play, clears a program or switches the player off
7 ∞ ........................ skips and searches CD tracks backwards
§ ........................ skips and searches CD tracks forwards
8 + ........................... volume up
– ........................... volume down
9 •••• 2 .............. opens the CD lid
0 ............................. type plate
Supplied Accessories:
1 x headphones, HE545 or HE570
2 x rechargeable batteries, AY3364
1 x external battery case, AY3380
1 x remote control, AY3774
1 x headphone jack adapter (for some versions only)
1 x AC/ DC adapter, AY3170
2
CONTROLS
PLAYING A CD
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the •••• 2 slider to open the player.
2 Insert an audio CD, printed side up, by pressing the
CD onto the hub.
3 Close the player by pressing the lid down.
4 Press 2; to switch the player on and start playback.
yDisplay: The current track number and elapsed
playing time.
• You can pause playback by pressing 2;.
yDisplay: Paused playback time flashes.
• You can continue playback by pressing 2; again.
5 Press 9 to stop playback.
yDisplay: The total number of tracks and the
total playing time of the CD.
6 Press 9 again to switch the player off.
• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Notes:– If there is no activity, the set will automatically
switch off after a while to save energy.
– Use the buttons on the set to operate if you
have connected the headphones with the
headphone jack adapter.
REMOTE CONTROL AY3774
2
CONTROLS ( see figure )
1 p .......................... 3.5 mm headphone jack
2 Clip
3 HOLD .................... locks all buttons
4 VOLUME (3 , 4) adjusts the volume
2;........................ switches the set on, starts playback and interrupts
playback
∞ /§.................. skips and searches backward / forward tracks
5 9
stops playback and switches the set off
6 DBB ...................... switches the bass enhancement on and off
7 PROG .................... programs tracks and review the program
8 MODE................... selects the different playing possibilities
9 Display
Using the remote control
The remote control allows you to command all the functions on the player. For
convenience, the remote control buttons also overrides the HOLD function on the
set. Use only the AY3774 remote control.
Press 9 on the set twice to switch off the set.
1
2 Firmly connect the remote control to p/LINE OUT on the set.
3 Firmly connect the headphones to the jack on the remote control.
On the remote control press and hold 2; for 2 seconds to switch on the set
4
and to start playback.
y playback starts and the track number are displayed.
5 Adjust the volume and sound on the player and your remote control.
Note: Replace the batteries as soon as
0
is displayed.