Specifications; Warranty And Service - Arbortech AS170 Mode D'emploi

NOTE: Failure to use the dust extraction funnel
E
when cutting masonry materials will cause
N
excessive wear of electrical components.
Damage caused by dust will lead to premature
G
failure of the motor, which will affect the
warranty.
CAUTION: Verify that the vacuum machine being
used has a filter system appropriate for the
material being cut. Incorrect filtration can result
in inadequate dust control and also possible
damage to the vacuum machine.
Dust extraction funnel

9. SPECIFICATIONS

ITEM
Cutting depth/width
Weight, with cutting
blades
Dimensions without
blades
No load speed n
Electrical rating,
nominal
Dust extraction vacuum
hose interface
ENGLISH 11
SPECIFICATION
170mm (6 3/4")/7.2mm
(9/32"), (depending on
blade/material)
4.3kg (9.5lb)
450 mm (17 11/16") L
75 mm (3") W
240 mm (9 7/16") H
5100 rpm
0
120V AC/DC
60H z
13 A
30mm (1 3/16") ID, EN
60335-2-69
ITEM
Belt tension
Blade mount bolt
torque

10. WARRANTY AND SERVICE

For warranty repair, inspection, service and spare
parts, please contact your place of purchase,
or
Check out our website www.arbortechusa.com to
locate a dealer or service agent in your area
or
Contact us directly:
Arbortech USA Address
80 Erdman Way, Suite 200Leominster, MA
04153Telephone (Office): 978-466-7945Toll Free:
866-517-7869 Toll FreeUS Fax: 866-515-8104
SPECIFICATION
1.5 mm (1/16") maxi-
mum mid-span deflec-
tion with
25 N (2.5 kg) (5lb)
deflection force
18 Nm (1.8 kg-m),
(13.2ft-lb), un-lubri-
cated