Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INSTRUCTIONS REGARDING THE PLUG ON YOUR PRODUCT
Fig. 1
HZ-614, HZ-615, & HZ-617 SERIES OPERATION
• Place the heater on a firm, level surface away from any
combustible material.
• With Power Knob in the OFF position, plug the heater into a
grounded outlet.
• Turn the Thermostat Knob fully clockwise
• To turn the heater on, turn the Power Knob clockwise to the ON
position. (Fig. 2).
• If you want to use the Quick Heat
the Quick Heat
Setting.
®
• When the room reaches a comfortable temperature, slowly turn the thermostat control counter-
clockwise
until the heater goes off. This is the point at which the thermostat setting equals the
room temperature. If left at this setting, the thermostat will automatically turn the heater on and off to
maintain the selected temperature.
HZ-817 SERIES OPERATION
• Place the heater on a firm, level, open surface free from
obstructions and at least 3 feet (0.9 m) away from any
combustible materials.
• Never leave an operating unit unattended.
• Plug the heater into an electrical wall outlet.
• Touch the Power Button to turn the heater on.
The power indicator light will illuminate. (Fig. 3)
• To save up to 35% in energy bills, turn the Energy Smart™
knob to your desired temperature. There are four distinct
settings of 65°F/18°C, 70°F/ 21°C, 75°F/23°C, and
80°F/26°C. The Energy Smart™ heater will automatically
select the appropriate power level to best accommodate
your desired temperature. As the air temperature in
the room approaches the set temp, the heater will
automatically lower the power consumption and provide
consistent warmth without wasting energy.
• The illuminated LED lights will indicate what the current room temperature is.
to the high setting.
feature, turn the Power Knob to
®
Fig. 2
Fig. 3
Control
Knob
Power
Button
Power Indicator Light
Quick
Heat
3
Publicité
Table des Matières
