Publicité
Les langues disponibles
Les langues disponibles
4.2 Tail light
For installing the tail light, e.g., on a seat support, proceed as follows:
•
The upper housing surface should be parallel to the ground and to the
longitudinal axis.
•
The installation height of the tail light should be at least 250 mm and a
maximum of 1200 mm above the ground.
1.
For assembling, fix the bracket of the tail light to the seat support using the
rubber rings.
2.
For this purpose, place the rubber bracket around the seat support and
attach it to the other side of the tail light bracket.
Make sure that the tail light is fixed firmly and mounted correctly before you start
using the bicycle.
English
11
Publicité
