Belkin F8E847eaUSB Manuel De L'utilisateur page 9

P74679_F8E847eaUSB_MAN
• Make sure you have properly established communication/
synchronization between the receiver and the Mouse:
1) Press the reset button on the receiver.
2) Press the connect button on the mouse.
• If the Mouse is not working, make sure that the LED on the Mouse
starts flashing when you push any of the Mouse buttons, or move the
Mouse. If the LED does not flash, check to make sure you have
installed the batteries correctly.
• When the Mouse LED is flashing, the LED on the receiver should also
flash to indicate they are speaking to each other. If the LED on the
receiver does not flash, it means that the device has not connected
properly. Push the reset button on the Mouse.
• If your Mouse pointer becomes choppy on-screen, replace batteries
with a fresh set.
8/23/04 3:46 PM
TROUBLESHOOTING
5
Page 5