Configuring Your Belkin Wireless G Usb Network Adapter To Use Security - Belkin F5D7050 Manuel De L'utilisateur

Using the Belkin Wireless Networking Utility
The following diagram shows the effect of not having the correct
network key throughout your network.
The Card cannot access the network because it uses a different network key than the one
configured on the wireless router.
IMPORTANT: You must now set all wireless network cards/adapters
to match these settings.
Configuring your Belkin Wireless G USB Network
Adapter to use Security
At this point, you should already have your wireless router (or access
point) set to use WPA or WEP. In order for you to gain a wireless
connection, you
will need to set
your Wireless
G USB Network
Adapter to
use the same
security
settings.
Changing
the Wireless
Security
Settings
The Belkin
Wireless G
USB Network
Adapter
supports the
latest WPA
security feature
as well as
the legacy
WEP security
standard. By
default, wireless
security is
disabled.
To enable
security, you
will first need to
determine which
standard is
used by the
21 21
1
2
3
4
5
6