Setting Up: Basics; Where To Find More Help; How To Install Your Router - Linsys MAX-STREAM AC1750 Guide De L'utilisateur

Setting Up: Basics

Where to find more help

In addition to this user guide, you can find help at these locations:
• Linksys.com/support/EA7300 (documentation, downloads, FAQs, technical support, live chat,
forums)
Note—Licenses and notices for third party software used in this product may be viewed on
http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-
us/gplcodecenter for questions or GPL source code requests.

How to install your router

1. To complete setup, you will need a computer to visit
browser.
2. Identify your equipment.
If you have a separate modem and standalone
router, disconnect and remove your old router.
3. Position the antennas straight up and plug in the router to a power source. Make sure the
power switch in the | (on) position.
4. Connect your router to your modem or modem router. Plug one end of the included internet
cable to the yellow Internet port on your new router. If you have a modem, plug the other end
into the Ethernet (LAN) port on the modem. If you have a modem-router, plug into any available
port.
5. Wait until the illuminated Linksys LED on the top of your router stops blinking and is solid
white.
6. Connect to the Wi-Fi name shown in the Quick Start Guide that came with your router. (You
can change these details later.) If you need help connecting to the network refer to your
device documentation at linksys.com/support/ea7300.
http://LinksysSmartWiFi.com
If you have a modem-router, leave it
connected.
in a web
6