Headphone Functions - LEXIBOOK BTHP400 Serie Mode D'emploi

BTHP400seriesIM1045_9Jan_V08.indb 8

HEADPHONE FUNCTIONS

Volume
To decrease the volume, press the – button (4). To increase the volume, press
the + button (3).
CAUTION: Too high volume, especially when using headphones, can damage
your hearing. For this reason, please turn the volume down.
Previous/ Next
Press and hold the – button (4) for one second to go back to the previous
track. Press and hold the + button (3) for one second to go to the next track.
Play
Press the Play/Pause button (2) to play audio files from your player.
Auto play/pause in Bluetooth ® mode
1. When you take off the headphone for more than 3 seconds, the music
enters pause mode.
2. The music resumes when you put the headphone back on within 5 minutes.
3. After 5 minutes, the headphone enters sleep mode and the Bluetooth ®
connection stops.
4. When you put the headphone back on during sleep mode, the headphone
reconnects to the last paired device. You can play the music again by pressing
the Play button.
Notes: Some music players do not fully support Bluetooth ® audio controls.
Play/pause, previous and next buttons on the Bluetooth ® speaker may
not respond. The music player may also turn off. To get the best control
experience in the said player, use the on-screen track controls of your music
player rather than those on the headphone.
Handsfree mode for phone calls
1. Press the Call button (2) once to answer calls.
2. To reject a call, press and hold the Call button (2) for two seconds.
3. During a call, press the Call button (2) once to end it.
Microphone
The speaker is equipped with a microphone (6) that you can use for your calls.
LED Status
- The LED (7) alternates between red and blue during searching and pairing.
- The LED (7) lights up red and blue simultaneously for 2 seconds during
power on and power off.
- The LED (7) blinks twice in blue every 3 seconds when speaker is paired.
- The LED (7) blinks three times in red every 15 seconds when the battery
is low.
Connecting to an audio player (without Bluetooth ® )
1. Connect the 3.5mm audio cable to the headphone's 3.5mm jack and the
other end of the cable to your personal device.
2. Turn the headphone on.
3. Click on your device's play button to listen to your desired audio file.
4. You can also listen to audio files from Internet.
5. To turn the headphone off, slide the ON/OFF switch (5) down.
6. Unplug the cable from the headphone and the playing device.
8
• Bluetoo
• Speake
40Hz - 20
• Microph
response
• Built-in
• With 3.5
• Chargin
• Standby
• Chargin
• Playing
• Standby
• Low bat
• Effectiv
We, Lexib
2, avenue
91953 Co
Declare u
Kind of p
Type des
Is in com
EN 6006
EN 5501
EN 5502
EN 6100
EN 6100
EN 300 3
EN 301 4
EN301 4
EN 6247
We hereb
EMC Dire
and with
Yiu Wai M
Product D
30/01/20
09/01/2015 2:17 PM