LEXIBOOK RL975 Série Mode D'emploi page 8

Installation
Unpacking the device
When unpacking, ensure that the following elements are included:
1 x Lexibook® Projection Alarm Clock
1 x instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this
product and should be discarded.
Settings
CLOCK
1. To set the clock, press MODE.
2. Press SNOOZE to select hour display in 12Hr or 24Hr.
3. Press SET °C/°F once: the hour digit starts flashing.
4. Press SNOOZE to change the setting value. Then press SET °C/°F to move to the next setting. The setting
sequence is displayed in the following order:
Hours Minutes Year Month Date Day of the week
5. Press MODE four times to go back to the clock mode.
ALARM
1. To set the alarm, press ALARM once.
2. Press SET °C/°F once: the hour digit starts flashing.
3. Press SNOOZE to set the hour value and then press SET °C/°F to go to the next setting.
4. Press SNOOZE to set the minute value and press SET °C/°F twice to confirm.
5. When the alarm sounds, press SNOOZE to snooze the alarm for 3 minutes or press any button (except
SELECT and VOLUME) to turn the alarm off. The alarm will ring at the same time the next day.
To deactivate the alarm:
Press ALARM to enter alarm mode. To turn the alarm off, press SET °C/°F five times until only lines appear
on the screen. To return to clock mode, press MODE three times in a row.
Note: To change the alarm sound, press SOUND ON/OFF first, then press SELECT repeatedly until you
have reached the nature sound of your choice. You can also simply listen to one of the 7 nature sounds by
pressing SOUND ON/OFF.
8
RL975seriesIM1223_27May_V09.indd 8 27/05/2013 10:42 AM