Cleaning And Maintenance; Waste Disposal; General Precautions; Technical Data - GN Resound LYNX BL-95 Manuel D'utilisation

Cleaning and maintenance

Vacuum outside of Lynx Flash with a soft brush from time to time. Use a lightly moistened cloth to dry
off the exterior. Never use cleaning products or solvents.
Repairs
If the product malfunctions it must be sent to an authorised technician for repair. Do not attempt to
open the case of the device since this would invalidate the warranty. If your product requires service,
please contact your hearing care professional for assistance.

Waste disposal

This product contains electrical or electronic equipment and should be disposed of carefully
in the interest of your safety and the environment. Please contact your local hearing care
professional concerning disposal of the product.

General Precautions

• If you cannot see the Lynx Flash, or if you are asleep without using an under-pillow vibrator, you will
probably not notice that the product is signaling an alarm. This is particularly important if there is a
fire.
• Low-energy radiation (eg from burglary alarms, room surveillance systems, radio equipment, mobile
telephones) will not damage the device.
• Warning: External devices connected to the product must be safe according the requirements of EN
60601-1-1, EN 60335-1 or EN 60065, as appropriate.
Part number
BL-95 (including table stand)
Accessories:
Analogue alarm clock
Under-pillow vibrator

Technical data

Modulation:
Frequency:
Number of channels:
External input:
External output:
Lamp:
Power supply:
Range:
Dimensions:
Any issues relating to the EU Medical Device Directive
93/42/EEC should be directed to GN ReSound A/S.
200 30 78
200 30 73
200 30 40
AM.
433,92 MHz.
16.
1-12 V DC. For alarm clock or aerial.
12 V DC. For under-pillow vibrator.
10 W 12 V halogen.
12 V AC/DC 600 mA.
Approx. 15 m indoors.
140 x 70 x 45 mm.
ENGLISH