Battery Charging - AgroLogic 29921 Mode D'emploi

2. Zero
In general, the scale shows "0.0kg" or "0.00kg" after it is turned on.
Weighing procedure
a) Once the load is suspended completely, the display shows the weight value of the load. When the "Stable" indicator is
lit, weight value can be recorded.
b) In case there is tare weight such as cable, load the tare and press „NET"to zero the display to "0" kg. The weight value
after this will be the net weight. This will not change until the tare change or the scale being turned off
3. Turn Off the Scale
a) After weighing operation, the scale should be turned off. Press the Off key twice to turn off the display.
b) Press the main power switch on the back of the scale case to shut off the power to the scale completely to prevent the
leakage of the battery
5. Battery Charging Method
1. Lithium Battery (self contained)
a) Open the scale back cover (see Figure 3) to connect the charger adaptor. And then connect the power for the adaptor.
b) When the lithium battery is fully charged, the indicator on the charger adaptor is changed from color red (during the
charging process) to green, indicating the completion of the charge process.
c) For optimized charging efficiency, it is recommended that the charging to be done during the scale turned off.
According to the lab testing results, with a fully charged 7.4V/2AH lithium battery, LED display scale can
operate over 20 hours.
d) To optimal battery life time, it is recommended to charge the battery for every 12-hour of scale operation.
6. Scale maintenance
1. The alkaline batteries are not rechargeable battery. Do not attempt to charge them.
2. Customer can select the 7.4V/2AH high power lithium rechargeable battery with DC8.4V/500mA charger. Please do
not use the rechargeable battery package other than those provided by factory. The use of third party product may
out of factory's guarantee.
3. During weighing operation, please don't load exceeding the scale's maximum capacity.
4. Perform routine inspection and maintenance to ensure operation safety:
a) Check for loose bolts.
b) Check hook and shackle for deformation, wearing and tearing.
c) Check other scale component for signs of metal fatigue.
d) Check for missing hook latch.
e) Avoid hitting, bumping on the display window.
f) Do not use the scale in the rain or heavily polluted environment.
g) Please remove the battery when scale is not used for extended period of time.
For problem "a" through "d", please stop using the scale and send it back to authorized dealer for repair or replacement
of problem parts.
Menensesteen eg 305 - 8940 ervik - T: 056 23 67 40 - info@agrologic.be
17