Installing Your Modem Driver; Verifying Your Modem - Atlantis WebRunner USB Série Manuel D'installation

7. Installing Your Modem Driver

Please following next steps to install driver/utility:
1. Insert the CD-ROM and the Auto-run program will appear. Alternatively, open a
file browser and double click on the autorun.exe file located in the CD directory.
In some specific setting on Windows system, you may need to proceed the
software manually, go to your Windows Start menu and choose Run, type
"D:\A01-PU3\Driver\<OSVer>\SETUP.EXE" in the dialog box and click
OK.
2. Click on "A01-PU3" icon to select WebRunner USB.
3. Select the current OS that you are using on th PC. Follow the install wizard
instructions to complete the installation.

8. Verifying Your Modem

 From your Windows desktop, right-click on My Computer icon and click
Properties.
 Click on the Hardware tab and then click Device Manager.

Double-click on the Modem device. You should see the Conexant CX93010
ACF Modem being listed. This means that your modem driver is successfully
installed. If you see a yellow exclamation mark besides Conexant CX93010
ACF Modem, it means that your driver is not installed successfully. Right-click
on the device and then uninstall the modem. Restart the system and then
install your modem driver again.
D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are
using.
If you need to install the driver manually, refer each
Windows OS to the following CD-Rom directory path:
D:\A01-PU3\Driver\<Windows OS>.
21