Assembly Instructions - Idylis 0416710 Manuel D'instructions

ASSEMBLY INSTRUCTIONS

1. Insert tube adapter (N) through the back of the hole
in the window panel (Q).
2. Using the 4 screws (O) supplied, secure the tube
adapter (N) from the front of the window panel
(Q).
Hardware Used
Screw 14 mm x 6 mm
x4
(assembly required)
O
3. Insert window panel extension (P) into the window
panel (Q). Lightly tighten the pre-assembled screws
in the window panel to hold the extension in place.
1
N
2
N
O
3
Q
P
Screws (included)
Lowes.com
6
ASSEMBLY INSTRUCTIONS
4. Select a suitable location for the unit, making
sure you have access to an electrical outlet.
Q
5. Install the window panel by expanding it to fi t
the length of the window and fully tightening the
pre-assembled screws in the middle.
Q
6. Attach an exhaust nozzle connector (L) to each
side of the exhaust hose (K). (The exhaust hose
has a min. length of 21-13/20 in. when
unstretched and a max. length 66-3/20 in.)
Then, install one end of the exhaust hose (K) to
the air exhaust (F) on the right rear side of the
unit and the other end of the exhaust hose into
the opening in the window panel (P).
4
Window
Electrical outlet
5
Horizontal Window
P
Screws come attached
Screws come attached
Q
Vertical Window
6
L
REAR OF UNIT
K
L
F
Lowes.com
7
Q
P
P