Vicon VM614-2 Manuel D'installation Et D'utilisation page 20

1) VM614-2 E 11/15/00 10:40 AM Page e-18
e-18
Settings Range in Each MENU
MENUN Settings Range
CONTRAST 0~100
BRIGHTNESS 0~100
SHARPNESS 0~100
COLOR 0~100
TINT 0~100
AUTO TIME 1~10 sec
AUTO SKIP On/Off
CAMERA OSD On/Off
PRESET
EXIT
Adjusting Settings of Menus : CONTRAST, BRIGHTNESS,
SHARPNESS, COLOR, TINT, and AUTO TIME, with
button.
• Select each Menu and then press
• A bar with which settings of the selected menu can be adjusted
will be displayed.
• Pressing VOLUME button decreases settings of the menu.
• Pressing VOLUME
Explanation
To select a specific Contrast within
the setting range.
To select a specific Brightness within
the setting range.
To select a specific Sharpness within
the setting range.
To select a specific Color within the
setting range.
To select a specific Tint within the
setting range.
To select a time interval, when a
channel is converted in Auto mode
within the setting range.
To skip over No Input channels in
Auto mode (On), or to display them
instead of skipping over (Off).
It shows characters for Channel (OSD) (On)
It does not chow characters for Channel
(OSD) (Off)
To set values of all menus as default.
To close the Menu mode.
VOLUME
button increases settings of the menu.
VOLUME
button.