Toshiba REGZA C3000 Série Mode D'emploi page 24

PC audio
In order to receive sound from a connected PC, plug the
audio cable into the back of the television (as shown in
'Connecting a computer' section), then use the
PC/HDMI1 audio settings.
In the SET UP menu press
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU EXIT
Highlight PC/HDMI1 audio then use
2
the PC option.
AV connection
PC/HDMI1 audio
HDMI1 audio
EXT2 input
Woofer
Back
MENU EXIT
NOTE: Selecting the PC option will force HDMI
into digital audio.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
Input selection and
AV connections
until
e
SET UP
1/2
English
UK
OK
OK
OK
OK
Watch TV
to select
x
PC
Digital
AV
Internal
Watch TV
continued
If the connected HDMI source does not support digital
audio, plug the audio cable into PC/HDMI1 audio on the
back of the television (as shown in the 'Connecting a
computer' section), then use the HDMI1 audio settings.
In the SET UP menu press
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU
In the AV connection menu press
2
PC/HDMI1 audio and using
Then highlight HDMI1 audio and using
3
select Auto., Digital or Analogue.
PC/HDMI1 audio
*
HDMI1 audio
EXT2 input
Woofer
Back
MENU
If the sound is missing select an alternative
setting.
NOTE: HDMI1 supports digital and analogue
sound, HDMI2 is digital sound only.
Certain formats of DVD disk may not output from
this TV (32/44.1/48kHz and 16/20/24 bits are
acceptable).
24
HDMI1 audio HDMI audio
until
e
SET UP
English
UK
OK
OK
OK
OK
Watch TV
EXIT
to highlight
e
select HDMI1.
x
AV connection
HDMI1
Digital
AV
Internal
Watch TV
EXIT
1/2
or
z x