Temper koban KPF-04 Manuel De L'utilisateur page 23

EN
KPF-04
12. Data Hold Symbol
Once the hold button is pressed, this symbol appears on LCD.
13.Bargraph
Bargraph has forty segments. It displays segments proportional to the actual
reading. Each segment represent one count.
14. Max/Min Hold symbol
Once the Max/Min button is pressed, either MAX or MIN shall be displayed on
LCD .
15.Continuity Symbol
If ohm and continuity function is selected, this symbol shall appears on LC.
16.Units symbols
Once a function is selected, corresponding unit (V, Ω,A or Hz) shall be displayed ,
on LCD.
7