Safety Information - Wolf BWL-1S-05 Notice De Montage

Safety information

42
GB
Safety information
The following symbols are used in this document to highlight important
information concerning personal safety and operational reliability:
Denotes instructions with which you must strictly comply to prevent risk or
injury to individuals, faults or damage to the appliance.
Denotes danger due to 'live' electrical components.
Indicates technical instructions that must be observed to prevent
Please note
malfunction or appliance damage.
Installation and commissioning must only be carried out by an electrician.
The installation instructions do not need to be retained.
Only an authorised contractor (i.e. an installation contractor, heating contrac-
tor) may install the appliance, commission it, and inspect, service and repair
it.
Before working on the appliance or heating device, isolate them from the
mains supply (e.g. by removing a separate mains fuse or by means of a
mains isolator) and safeguard against unauthorised reconnection.
Repairing parts which perform a safety function presents a risk to the safe
operation of the system. To prevent such risks, only use original Wolf parts
or Wolf-approved spare parts when replacing components.
3064055_201802.indd