Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPTIONAL BATTERY
█
The ANS3000 utilizes non-volatile flash memory to store data
such as the language selection, ringer number, playback speed,
outgoing messages and recorded messages. This data will not
be lost if the ANS3000 loses power. However, the Day setting
is not stored and will need to be reset when power is restored.
If you choose to insert the optional 9 volt alkaline battery,
you will be able to receive new messages for approximately 2
hours during a power outage, but you will not be able to access
any of the other machine functions. Once power is restored,
you will be able to listen to the new messages.
The battery compartment is located on the underside of the
answering machine.
BRACKET INSTALLATION
█
For wall mounting, insert the bracket
to A. For desk/table mounting, you can
slide the bracket into B for stabilization.
Wall Mounting
1. Install
two
(not supplied) at a distance of 70
mm apart from each other on a
horizontal line.
2. Insert the bracket to location A,
shown in the figure below.
raised mounting pins line up with
the keyhole slots on the unit. Once
the holes are lined up, snap the
bracket securely into place.
3. Holding the unit slightly above
the
mounting
wall,
push
self-tapping
screws
the
unit
8 – ENGLISH
screws
The
on
the
against
Publicité
Table des Matières
